roleSync:
  enabled: false

# config_default.yaml 配置文件
# @Link  https://github.com/xiujiecn/xiu-admin
# @Copyright  Copyright (c) 2025 LiXiujie
# @Author  Lxj <xxx@example.com>
# @License  https://github.com/xiujiecn/xiu-admin/blob/master/LICENSE

# 系统配置
workerDiagnostic:
  enabled: false

fullSyncOps:
  control:
    # Worker control is reachable only on the private Docker network.
    listenAddress: ":18081"
    readTimeout: "5s"
    writeTimeout: "15s"
    shutdownTimeout: "10s"
  archive:
    enabled: false
    rootDir: "/app/logs/full-sync"
    pollInterval: "10s"
    retryMin: "5s"
    retryMax: "5m"
  replay:
    # Retry-round budget for a replayed Run when the request omits maxRounds.
    # Requests may override it up to 100; larger requests are rejected.
    maxRounds: 3

# Alipay credentials are injected by the deployment configuration.
alipay:
  appId: "${APP_ID}"
  privateKey: "${PRIVATE_KEY}"
  alipayPublicKey: ""
  isProduction: false

rabbitmq:
  balanceRecharge:
    retryDelay: "1m"
    # 充值超时消息最大重试次数，超过后投递到 iotlcm.balance.recharge.dlq
    maxRetry: 100
  batchExecute:
    executionTimeout: "0s"
    finalizationTimeout: "60s"
    retryDelay: "30s"
    maxRetries: 3

batch:
  allocate:
    processingRetryAfter: "30m"
    deadlockMaxRetries: 3
    deadlockRetryDelay: "200ms"
  inbound:
    upstreamBatchSize: 1
    upstreamConcurrency: 8
    upstreamRateLimit:
      enabled: true
      mode: "redis"
      redisGroup: "default"
      keyPrefix: "iotlcm:worker:inbound:upstream_basic_info"
      redisFailureFallback: "error"
      default:
        qps: 20
        burst: 1
        requestCost: 1
      channels: {}

# 本月流量全量同步（首版默认关闭，完成 PoC 后按环境开启）
trafficUsageFullSync:
  enabled: false
  supplyObservation:
    enabled: false # 1s sampling, 10s snapshots; Run first-round channel scanning only
  redisKeyPrefix: "flow:"
  retry:
    enabled: true
    maxRounds: 5
    failureRetention: "720h"
  producer:
    # channel requires idx_card_chan_key; never creates or rebuilds an index.
    scanConcurrency: 4 # SQL burst protection, not a measured optimum
    pageSize: 100
    globalHighWaterMark: 10000
    channelHighWaterMark: 2000
    pollInterval: "2s"
    runLockKey: "flow:producer:active"
    runLockTTL: "5m"
  consumer:
    enabled: false
    # Full-sync consumer calls Chan directly; leave empty only for local tests.
    chanClientName: "localhost:8110"
    # A batch of 100 cards may queue behind the gateway's per-IP Tibiot
    # limiter (about 650ms per request) before its request is served.
    chanClientTimeout: "90s"
    lockKey: "flow:consumer:active"
    lockTTL: "1m"
    pollInterval: "1s"
    leaseTTL: "3m"
    taskTimeout: "2m"
    claimBatch: 100
    mobileConcurrency: 30
    telecomConcurrency: 20
    genericConcurrency: 1
    genericQPS: 1.5
    # 失败池告警阀值（条目数）：单条 FailureRecord 约 1KB 且保留整个
    # failureRetention，超阀值只打 WARN 日志，绝不截断 Run。
    failurePoolAlertThreshold: 50000
    templateQPS:
      sim_yd_v5: 30
      sim_yd_mock_v5: 30
      sim_onelink_tengyu_v1: 30
      sim_onelink_beixin_v1: 30
      lanshang_8000: 30
      lanshang_8003: 30
      sim_onelink_xuzhou_mobile_v1: 30
      sim_onelink_lelian_v1: 30
      sim_onelink_qianxun_v1: 30
      sim_onelink_henan_xinjing_v1: 30
      sim_onelink_daihe_v1: 30
      sim_dx_v1: 25

# 独立的日流量同步链路，与月流量/状态同步同构。
# 默认关闭：打开后 worker 才装配日流量 producer 与 consumer。
# 与 trafficUsageFullSync 使用独立前缀与 templateQPS，避免三条链路互相抢运营商配额；
# 定时窗口建议与全量流量同步错峰 2-3 小时（避开 0-4 点出账窗口）。
trafficUsageDailySync:
  enabled: false
  redisKeyPrefix: "daily:"
  retry:
    enabled: true
    # 默认 3 轮，对齐状态同步；失败卡最终进失败池，可 replay。
    maxRounds: 3
    failureRetention: "720h"
  producer:
    pageSize: 100
    globalHighWaterMark: 0
    channelHighWaterMark: 0
    pollInterval: "2s"
    runLockKey: "daily:producer:active"
    runLockTTL: "5m"
  consumer:
    enabled: false
    lockKey: "daily:consumer:active"
    lockTTL: "1m"
    pollInterval: "1s"
    leaseTTL: "3m"
    taskTimeout: "2m"
    claimBatch: 100
    mobileConcurrency: 30
    telecomConcurrency: 8
    genericConcurrency: 1
    genericQPS: 1.5
    # 与 trafficUsageFullSync 分开配置：日流量与月流量走同一出口 IP，
    # 共用一份 QPS 会让两轮同步互相挤占运营商配额。
    templateQPS:
      sim_yd_v5: 30
      sim_yd_mock_v5: 30
      sim_onelink_tengyu_v1: 30
      sim_onelink_beixin_v1: 30
      lanshang_8000: 30
      lanshang_8003: 30
      sim_onelink_xuzhou_mobile_v1: 30
      sim_onelink_lelian_v1: 30
      sim_onelink_qianxun_v1: 30
      sim_onelink_henan_xinjing_v1: 30
      sim_onelink_daihe_v1: 30
      sim_dx_v1: 25

# 独立的月流量历史同步链路（写 TDengine 月表），与日流量/状态同步同构。
# 注意：这与 trafficUsageFullSync 不是一回事——后者填的是 MySQL 当月快照。
# 默认关闭：日流量验证通过后再单独打开。
trafficUsageMonthlyHistorySync:
  enabled: false
  redisKeyPrefix: "monthly-history:"
  retry:
    enabled: true
    maxRounds: 3
    failureRetention: "720h"
  producer:
    pageSize: 100
    globalHighWaterMark: 0
    channelHighWaterMark: 0
    pollInterval: "2s"
    runLockKey: "monthly-history:producer:active"
    runLockTTL: "5m"
  consumer:
    enabled: false
    lockKey: "monthly-history:consumer:active"
    lockTTL: "1m"
    pollInterval: "1s"
    leaseTTL: "3m"
    taskTimeout: "2m"
    claimBatch: 100
    mobileConcurrency: 30
    telecomConcurrency: 8
    genericConcurrency: 1
    genericQPS: 1.5
    # 三条链路共用出口 IP，各自独立限速，避免互相挤占运营商配额。
    templateQPS:
      sim_yd_v5: 30
      sim_yd_mock_v5: 30
      sim_onelink_tengyu_v1: 30
      sim_onelink_beixin_v1: 30
      lanshang_8000: 30
      lanshang_8003: 30
      sim_onelink_xuzhou_mobile_v1: 30
      sim_onelink_lelian_v1: 30
      sim_onelink_qianxun_v1: 30
      sim_onelink_henan_xinjing_v1: 30
      sim_onelink_daihe_v1: 30
      sim_dx_v1: 25

# 独立的状态同步队列链路，作为消费 worker 常驻启用。
simStatusQueueSync:
  enabled: true
  redisKeyPrefix: "sim-status:"
  retry:
    enabled: true
    maxRounds: 3
    failureRetention: "720h"
  producer:
    pageSize: 1000
    globalHighWaterMark: 0
    pollInterval: "1s"
    runLockKey: "sim-status:producer:active"
    runLockTTL: "5m"
  consumer:
    enabled: true
    lockKey: "sim-status:consumer:active"
    lockTTL: "1m"
    pollInterval: "1s"
    leaseTTL: "3m"
    taskTimeout: "2m"
    claimBatch: 100
    mobileConcurrency: 100
    telecomConcurrency: 8
    genericConcurrency: 1
    genericQPS: 1.5
    networkRetries: 2
    # 失败池告警阀值（条目数）：单条 FailureRecord 约 1KB 且保留整个
    # failureRetention，超阀值只打 WARN 日志，绝不截断 Run。
    # 50000 条 ≈ 50MB，约当 255,976 张卡的 20% 失败率。
    failurePoolAlertThreshold: 50000
    templateQPS:
      sim_yd_v5: 100
      sim_yd_mock_v5: 100
      sim_onelink_tengyu_v1: 100
      sim_onelink_beixin_v1: 100
      lanshang_8000: 100
      lanshang_8003: 100
      sim_onelink_xuzhou_mobile_v1: 100
      sim_onelink_lelian_v1: 100
      sim_dx_v1: 5

# 独立的 IMEI 全量同步链路（首版默认关闭，PoC 后按环境开启）。
#
# 该链路是"只增不减"的：只写非空 IMEI，上游返回空值只记心跳不写值，
# 所以一次上游抖动不会清空全库 IMEI。
#
# 移动 IMEI 没有批量接口，chan 内部逐卡请求，吞吐 = 卡数 × 单请求耗时。
# 电信 18 QPS 额度与状态/流量链路共享，故 templateQPS 压到 5。
imeiFullSync:
  enabled: false
  redisKeyPrefix: "imei:"
  retry:
    enabled: true
    # 移动 13000 系统忙是常态（1 QPS 下仍有约 70%），轮数给足
    maxRounds: 5
    failureRetention: "720h"
  producer:
    pageSize: 1000
    globalHighWaterMark: 0
    pollInterval: "1s"
    runLockKey: "imei:producer:active"
    runLockTTL: "5m"
  consumer:
    enabled: false
    # 全量同步直连 chan；留空仅供本地测试
    chanClientName: ""
    chanClientTimeout: "30s"
    lockKey: "imei:consumer:active"
    lockTTL: "1m"
    pollInterval: "1s"
    leaseTTL: "3m"
    taskTimeout: "2m"
    claimBatch: 100
    mobileConcurrency: 100
    telecomConcurrency: 8
    genericConcurrency: 1
    genericQPS: 1.5
    networkRetries: 2
    # 失败池告警阀值（条目数）：单条 FailureRecord 约 1KB 且保留整个
    # failureRetention（30 天），超阀值只打 WARN 日志，绝不截断 Run。
    # 50000 条 ≈ 50MB，约当 255,976 张卡的 20% 失败率。
    failurePoolAlertThreshold: 50000
    templateQPS:
      sim_yd_v5: 100
      sim_yd_mock_v5: 100
      sim_onelink_tengyu_v1: 100
      sim_onelink_beixin_v1: 100
      lanshang_8000: 100
      lanshang_8003: 100
      sim_onelink_xuzhou_mobile_v1: 100
      sim_onelink_lelian_v1: 100
      # 电信额度与状态/流量链路共享，压到最低
      sim_dx_v1: 5

upstream:
  proxy:
    address: "localhost:8510"
    timeout: 10s
  gateway:
    address: "localhost:8110"
    timeout: 10s
    # 入库前卡还未进入本地卡表，三码校验直连 upstream-chan，避免走 8510 proxy 的本地卡拦截。

system:
  name: "IotLCM"
  version: "1.0"
  description: "IotLCM Server"
  gfmode: "dev"
  upload:
    local:
      path: "resource/upload"

# 日志配置
logger:
  path:                  "/app/logs"             # 日志文件路径。默认为空，表示关闭，仅输出到终端
  file:                  "{Y-m-d-H}.log"         # 日志文件格式。默认为"{Y-m-d}.log"
  prefix:                ""                    # 日志内容输出前缀。默认为空
  level:                 "dev"                 # 日志输出级别
  timeFormat:            "2006-01-02T15:04:05" # 自定义日志输出的时间格式，使用Golang标准的时间格式配置
  ctxKeys:               []                    # 自定义Context上下文变量名称，自动打印Context的变量到日志中。默认为空
  header:                true                  # 是否打印日志的头信息。默认true
  stdout:                true                  # 日志是否同时输出到终端。默认true
  rotateSize:            0                     # 按照日志文件大小对文件进行滚动切分。默认为0，表示关闭滚动切分特性
  rotateExpire:          0                     # 按照日志文件时间间隔对文件滚动切分。默认为0，表示关闭滚动切分特性
  rotateBackupLimit:     0                     # 按照切分的文件数量清理切分文件，当滚动切分特性开启时有效。默认为0，表示不备份，切分则删除
  rotateBackupExpire:    0                     # 按照切分的文件有效期清理切分文件，当滚动切分特性开启时有效。默认为0，表示不备份，切分则删除
  rotateBackupCompress:  0                     # 滚动切分文件的压缩比（0-9）。默认为0，表示不压缩
  rotateCheckInterval:   "1h"                  # 滚动切分的时间检测间隔，一般不需要设置。默认为1小时
  stdoutColorDisabled:   false                 # 关闭终端的颜色打印。默认开启
  writerColorEnable:     false                 # 日志文件是否带上颜色。默认false，表示不带颜色

# 数据库配置
database:
  logger:
    path:    "/app/logs/sql"
    level:   "all"
    stdout:  true
  default:  # 分组名称，可自定义，默认为default
    link: "${DB_DSN}"
    debug: true #开启调试模式
    charset: "utf8mb4" # (可选)数据库编码(如: utf8mb4/utf8/gbk/gb2312)，一般设置为utf8mb4。默认为utf8。
    dryRun: false #ORM空跑(只读不写)
    maxIdle: 30 #连接池最大闲置的连接数
    maxOpen: 100 #连接池最大打开的连接数
    maxLifetime: 120 #(单位秒)连接对象可重复使用的时间长度

# 缓存配置
cache:
  adapter: "redis" # 缓存适配器，支持：file|redis
  fileDir: "resource/cache" # 缓存文件目录

# Redis 配置
redis:
  # 单实例配置
  default:
    mode: "single" #redis模式，支持：single|cluster|sentinel
    sentinelMasterName: "xiujie-master" #哨兵模式主节点名称
    address: 127.0.0.1:6379
    db: 0
    pass: "${SERVICE_PASSWORD}"
    minIdle: 5 #最小空闲连接数
    maxIdle: 30 #允许闲置的最大连接数
    maxActive: 5000 #最大活跃连接数
    idleTimeout: "60s" #连接最大空闲时间，使用时间字符串例如30s/2m/2d
    ClientName: "SystemCache"